manualshive.com logo in svg

Intel 480T, User Manual

Share
Download
Intel 480T User Manual Download Page 77

Configuring Switch 
Ports

This chapter describes how to configure ports on the Intel

®

 NetStructure

™

 

480T Routing Switch and covers the following topics:

•

Enabling and disabling ports

•

Configuring port speed and duplex settings

•

Port commands

•

Load-sharing on the switch

•

Port-mirroring

Enabling and Disabling Ports

By default, all ports are enabled. To enable or disable one or more ports, 
use the following command:

[enable | disable] ports <portlist>

For example, to disable ports 3, 5, and 12 through 15 on the switch, enter 
the following:

disable port 3,5,12-15

Even though a port is disabled, the link remains enabled for diagnostic 
purposes.

4

Summary of Contents for 480T
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands