Intel 480T, User Manual

Page: 79 / 367

C H A P T E R 4 Configuring Switch Ports
77
The following example turns autonegotiation off for port 4 (a
Gigabit Ethernet port):
config ports 4 auto off duplex full
Port Commands
Table 19 describes the port commands.
Table 19: Port Commands
Command Description
config jumbo-frame size
<jumbo_frame_mtu> Configures the jumbo frame size. The range is
between 1522 and 9216. The default setting is
9216.
config ports <portlist> auto off {speed [10 |
100 | 1000]} duplex [half | full] Changes the configuration of a group of ports.
Specify the following:
•
auto off
— The port will not
autonegotiate the settings.
•
speed
— The speed of the port (for 10/100
Mbps or 100/1000 Mbps ports only).
•
duplex
— The duplex setting (half- or full-
duplex).
config ports <portlist> auto on Enables autonegotiation for the particular port
type; 802.3u for 10/100 Mbps ports or 802.3z
for 100/1000 Mbps ports.
config ports <portlist> display-string
<string> Configures a user-defined string for a port. The
string is displayed in certain
show
commands
(for example,
show port all info
). The
string can be up to 16 characters.
config ports <portlist> qosprofile
<qosname> Configures one or more ports to use a particular
QoS profile.
disable jumbo-frame ports [<portlist> | all] Disables jumbo frame support on a port.