Intel 480T, User Manual

Page: 246 / 367

244
C H A P T E R 1 3 IPX
*
Routing
IPX Commands
Table 63 describes the commands used to configure basic IPX
settings.
Table 63: Basic IPX Commands
Command Description
config ipxmaxhops <number> Configures the IPX maximum hop count
when forwarding IPX packets. The
default setting is 16. Change this only if
NetWare Link Services Protocol (NLSP)
is running in the IPX network.
config ipxroute add [<dest_netid> | default]
<next_hop_id> <next_hop_node_addr> <hops>
<tics> Adds a static IPX route entry in the IPX
route table. Specify:
•
next_hop_id
— The NetID of the
neighbor IPX network.
•
next_hop_node_addr
— The node
address of the next IPX router.
•
hops
— The maximum hop count.
•
tics
— The timer delay value.
Up to 64 static routes can be entered.
config ipxroute delete [<dest_netid> | default]
<next_hop_netid> <next_hop_node_addr> Removes a static IPX route entry from
the route table.