Intel 480T, User Manual

Page: 188 / 367

186
C H A P T E R 1 0 IP Unicast Routing
disable loopback-mode vlan [<name> | all] Disables loopback-mode on an interface.
disable multinetting Disables IP multinetting on the system.
enable bootp vlan [<name> | all] Enables the generation and processing of
BOOTP packets on a VLAN to obtain an
IP address for the VLAN from a BOOTP
server. The default setting is enabled for
all VLANs.
enable bootprelay Enables the forwarding of BOOTP and
Dynamic Host Configuration Protocol
(DHCP) requests.
enable ipforwarding broadcast {vlan <name>} Enables forwarding IP broadcast traffic
for one or all VLANs. If no argument is
provided, enables broadcast forwarding
for all VLANs. To enable,
ipforwarding
must be enabled on the
VLAN. The default setting is disabled.
enable ipforwarding {vlan <name>} Enables IP routing for one or all VLANs.
If no argument is provided, enables
routing for all VLANs that have been
configured with an IP address. The
default setting for
ipforwarding
is
disabled.
enable loopback-mode vlan [<name> | all] Enables a loopback mode on an interface.
If loopback is enabled, the router
interface remains in the UP state, even if
no ports are defined in the VLAN. As a
result, the subnet is always advertised as
one of the available routes.
enable multinetting Enables IP multinetting on the system.
Table 45: Basic IP Commands (continued)
Command Description