Intel 480T, User Manual

Page: 288 / 367

286
C H A P T E R 1 5 Status Monitoring and Statistics
To enable or disable the collection of RMON statistics on the
switch, use the following command:
[enable | disable] rmon
By default, RMON is disabled. However, even in the disabled state,
the switch responds to RMON queries and sets for alarms and
events. By enabling RMON, the switch begins the processes
necessary for collecting switch statistics.
Event Actions
The actions that you can define for each alarm are shown in
Table 75.
To be notified of events using SNMP traps, you must configure one
or more trap receivers, as described in Chapter 2, Installation and
Setup.
Table 75: Event Actions
Action High Threshold
No action
Notify only Send trap to all trap receivers.
Notify and log Send trap; place entry in RMON log.