Intel 480T, User Manual

Page: 247 / 367

C H A P T E R 1 3 IPX
*
Routing
245
config ipxservice add <service_type>
<service_name> <netid> <mac_address>
<socket> <hops> Adds a static entry to the IPX service
table. Specify:
•
service_type
— The service type.
•
service_name
— The service name.
•
netid
— The IPX network identifier
of the server.
•
mac_address
— The MAC address
of the server.
•
socket
— The IPX port number on
the server.
•
hops
— The number of hops (for
SAP routing purposes).
config ipxservice delete <service_type>
<service_name> <netid> <mac_address>
<socket> Deletes an IPX service from the service
table.
config vlan <name> xnetid <netid> [enet_ii |
enet_8023 | enet_8022 | enet_snap] Configures a VLAN to run IPX routing.
Specify:
•
enet_ii
— Uses standard Ethernet
2 header.
•
enet_8023
— Uses IEEE 802.3
length field, but does not include the
IEEE 802.2 LLC header.
•
enet_8022
— Uses standard IEEE
format and uses IEEE 802.2 LLC
header.
•
enet_snap
— Adds Subnetwork
Access Protocol (SNAP) header to
IEEE 802.2 LLC header.
enable type20 forwarding {vlan <name>} Enables the forwarding of IPX type 20
(NetBIOS inside IPX) packets from one
or more ingress VLANs. The default
setting is disabled.
Table 63: Basic IPX Commands (continued)
Command Description