Intel 480T, User Manual

Page: 57 / 367

C H A P T E R 3 Accessing the Switch
55
8 When you have finished using the facility, log out of the
switch by typing
logout
or
quit
Disconnecting a Telnet Session
An administrator-level account can disconnect a management
session that has been established by way of a Telnet connection. If
this happens, the user logged in by way of the Telnet connection is
notified that the session has been terminated.
To terminate a Telnet session:
1 Log in to the switch with administrator privileges.
2 Determine the session number of the session you want to ter-
minate by using the following command:
show session
3 Terminate the session by using the following command:
clear session <session_number>
Controlling Telnet Access
By default, Telnet services are enabled on the switch. Telnet access
can be restricted by the use of an access profile. An access profile
permits or denies a named list of IP addresses and subnet masks. To
configure Telnet to use an access profile, use the following
command:
enable telnet {access-profile [<access_profile> |
none]} {port <tcp_port_number>}
Use the
none
option to remove a previously configured access
profile.
To display the status of Telnet, use the following command:
show management
You must be logged in as an administrator to enable or disable
Telnet.
To disable Telnet, use the following command:
disable telnet