Intel 480T, User Manual

Page: 308 / 367

306
C H A P T E R 1 8 Software Upgrade and Boot Options
xmodem
— Indicates that you will be using XMODEM over the
serial port.
ipaddress
— Is the IP address of the TFTP server.
hostname
— Is the hostname of the TFTP server. (You must
enable DNS to use this option.)
filename
— Is the filename of the new image.
primary
— Indicates the primary image.
secondary
— Indicates the secondary image.
The switch can store up to two images; a primary and a secondary.
When you download a new image, you must select into which
image space (primary or secondary) the new image should be
placed. If not indicated, the primary image space is used.
You can select which image the switch will load on the next reboot
by using the following command:
use image [primary | secondary]
Rebooting the Switch
To reboot the switch, use the following command:
reboot {time <date> <time> | cancel}
where
date
is the date and
time
is the time (using a 24-hour clock
format) when the switch will be rebooted. The values use the
following format:
mm/dd/yyyy hh:mm:ss
If you do not specify a reboot time, the reboot occurs immediately
following the command, and any previously scheduled reboots are
cancelled. To cancel a previously scheduled reboot, use the
cancel
option.