Intel 480T, User Manual

Page: 186 / 367

184
C H A P T E R 1 0 IP Unicast Routing
IP Commands
Table 45 describes the commands used to configure basic IP
settings.
create udp-profile <profile_name> Creates a UDP-forwarding profile. You
must use a unique name for the UDP-
forwarding profile.
delete udp-profile <profile_name> Deletes a UDP-forwarding profile.
show udp-profile {<profile_name>} Displays the profile names, input rules of
UDP port, destination IP address, or
VLAN and the source VLANs to which
the profile is applied.
unconfig udp-profile vlan [<name> | all] Removes the UDP-forwarding profile
configuration for one or all VLANs.
Table 44: UDP-Forwarding Commands (continued)
Command Description
Table 45: Basic IP Commands
Command Description
clear iparp {<ipaddress> <mask> | vlan <name>} Removes dynamic entries in the IP ARP
table. Permanent IP ARP entries are not
affected.
clear ipfdb {<ipaddress> | vlan <name> } Removes the dynamic entries in the IP
forwarding database. If no options are
specified, all dynamic IP FDB entries are
removed.
config bootprelay add <ipaddress> Adds the IP destination address to
forward BOOTP packets.