manualshive.com logo in svg

Intel 480T, User Manual

Share
Download
Intel 480T User Manual Download Page 199

RIP and OSPF

This chapter describes the interior routing protocols available on the 
Intel

®

 

NetStructure

™

 480T Routing Switch, RIP and OSPF. It assumes 

that you are already familiar with IP unicast routing. If not, refer to the 
following publications for additional information:

•

RFC 1058 —

Routing Information Protocol (RIP)

•

RFC 1723 —

RIP Version 2

•

RFC 2178 —

OSPF Version 2

Overview

The switch supports the use of the Routing Information Protocol (RIP) 
and the Open Shortest Path First (OSPF) protocol for IP unicast routing. 

RIP is a distance-vector protocol, based on the Bellman-Ford (or distance-
vector) algorithm. The distance-vector algorithm has been in use for many 
years, and is widely deployed and understood.

11

Summary of Contents for 480T
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands