Intel 480T, User Manual

Page: 147 / 367

C H A P T E R 8 Quality of Service (QoS)
145
Physical and logical groupings
Two traffic groupings exist in this category:
• Source port
• VLAN
Source Port
A source port traffic grouping implies that any traffic sourced from
this physical port uses the indicated QoS profile when the traffic is
transmitted out to any other port. To configure a source port traffic
grouping, use the following command:
config ports <portlist> qosprofile <qosprofile>
In the following example, all traffic sourced from port 7 uses the
QoS profile named
qp3 when being transmitted.
config ports 7 qosprofile qp3
VLAN
A VLAN traffic grouping indicates that all intra-VLAN switched
traffic and all routed traffic sourced from the named VLAN uses the
indicated QoS profile. To configure a VLAN traffic grouping, use
the following command:
config vlan <name> qosprofile <qosprofile>
For example, all devices on VLAN servnet require use of the QoS
profile qp4 . The command to configure this example is as follows:
config vlan servnet qosprofile qp4
Verifying Physical and Logical Groupings
To verify settings on ports or VLANs, use the command
show qosprofile <qosprofile>
The same information is also available using the
show ports info
command for ports and the
show vlan
for VLANs.