Intel 480T, User Manual

Page: 221 / 367

C H A P T E R 1 1 RIP and OSPF
219
config ospf lsa-batching-timer <timer_value> Configures the OSPF LSA batching timer
value. The range is between 0 (disabled) and
600 seconds, using multiples of 5 seconds.
The LSAs added to the LSDB during the
interval are batched together for refresh or
timeout. The default setting is 30 seconds.
config ospf metric-table <10M_cost>
<100M_cost> <1G_cost> Configures the automatic interface costs for
10 Mbps, 100 Mbps, and 1 Gbps interfaces.
The default cost for 10 Mbps is 10, for 100
Mbps is 5, and for 1 Gbps is 1.
config ospf originate-default {always} cost
<metric> [ase-type-1 | ase-type-2] {tag
<number>} Configures a default external LSA to be
generated by OSPF, if no other default route
is originated by OSPF by way of RIP and
static route re-distribution. If
always
is
specified, OSPF always advertises the default
route. If
always
is not specified, OSPF adds
the default LSA if there is a reachable default
route in the route table.
config ospf routerid [automatic | <routerid>] Configures the OSPF router ID. If automatic
is specified, the switch uses the largest IP
interface address as the OSPF router ID. The
default setting is
automatic
.
config ospf spf-hold-time {<seconds>} Configures the minimum number of seconds
between Shortest Path First (SPF)
recalculations. The default setting is 3
seconds.
config ospf vlan <name> area <areaid> Changes the area ID of an OSPF interface
(VLAN).
create ospf area <areaid> Creates an OSPF area. Area 0.0.0.0 does not
need to be created. It exists by default.
enable ospf Enables OSPF process for the router.
Table 54: OSPF Configuration Commands (continued)
Command Description