manualshive.com logo in svg

Intel 480T, User Manual

Share
Download
Intel 480T User Manual Download Page 303

C   H   A   P   T   E   R   1 7

Using Intel

®

 Device View

301

The new switch’s icon appears in the Device Tree.

To Refresh the Device Tree

1

Right-click anywhere on the Device Tree.

2

Click Refresh on the menu that appears.

Refreshing the Device Tree updates it to show any newly discovered 
devices and changes in device status.

To Delete a Device from the Device Tree

1

Right-click the device you want to remove from the Device 
Tree.

2

Click Delete on the menu that appears.

Deleting a device from the Device Tree does not affect the actual 
device.

To Find a Device in the Device Tree

1

Right-click anywhere on the Device Tree.

2

Click Find on the menu that appears.

3

In the Find Device dialog box, type the IP address of the device 
you 

want to find in the tree.

4

Click OK.

The device’s icon is highlighted in the Device Tree.

Losing Contact with a Device

If Intel Device View loses contact with a switch, it replaces the switch 
icon with the non-responding switch icon. When the non-responding 
switch icon appears, you will not be able to manage the device in Intel 

Summary of Contents for 480T
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands