Intel 480T, User Manual

Page: 233 / 367

C H A P T E R 1 2 IP Multicast Routing
231
config dvmrp delete vlan [<name> | all] Disables DVMRP on one or all IP interfaces.
If no VLAN is specified, DVMRP is disabled
on all IP interfaces.
config dvmrp vlan <name> timer
<probe_interval>
<neighbor_timeout_interval> Configures DVMRP interface timers. Specify
the following:
•
probe_interval
— The amount of time
that the system waits between
transmitting DVMRP probe messages.
The range is 1 to 2,147,483,647 seconds
(68 years). The default setting is 10
seconds.
•
neighbor_timeout_interval
— The
amount of time before a DVMRP
neighbor route is declared to be down.
The range is 1 to 2,147,483,647 seconds
(68 years). The default setting is 35
seconds.
config dvmrp timer
<route_report_interval>
<route_replacement_time> Configures the global DVMRP timers.
Specify the following:
•
route_report_interval
— The
amount of time the system waits between
transmitting periodic route report
packets. The range is 1 to 2,147,483,647
seconds (68 years). The default setting is
60 seconds. Because triggered update is
always enabled, the route report will
always be transmitted prior to the
expiration of the route report interval.
•
route_replacement_time
— The hold-
down time before a new route is learned,
once the previous route has been deleted.
The range is 1 to 2,147,483,647 seconds
(68 years). The default setting is 140
seconds.
Table 57: IP Multicast Routing Configuration Commands (continued)
Command Description