Intel 480T, User Manual

Page: 289 / 367

Using Web Device
Manager
Web Device Manager is device-management software running in the
Intel
®
NetStructure
™
480T Routing Switch that allows you to access the
switch over a TCP/IP network, using a standard Web browser. Any
properly configured standard Web browser that supports frames and
JavaScript
*
(such as Netscape Navigator
*
3.0 or higher, or Microsoft
Internet Explorer
*
3.0 or higher) can be used to manage the system.
Web Device Manager provides a subset of the command-line interface
(CLI) commands available for configuring and monitoring the switch. If
a particular command is not available using Web Device Manager, you
must use the CLI to access the desired functionality.
Enabling and Disabling Web Access
By default, Web access is enabled on the switch. Use of Web access can
be restricted through the use of an access profile. An access profile
permits or denies a named list of IP addresses and subnet masks. To
configure Web access to use an access profile, use the following
command:
enable web access-profile [<access-profile> | none]
{port <tcp_port_number>}
Use the
none
option to remove a previously configured access profile.
16