Intel 480T, User Manual

Page: 191 / 367

C H A P T E R 1 0 IP Unicast Routing
189
config irdp [multicast | broadcast] Configures the destination address of the
router advertisement messages. The default
setting is
multicast
.
disable ip-option loose-source-route Disables the loose source route IP option.
disable ip-option record-route Disables the record route IP option.
disable ip-option record-timestamp Disables the record timestamp IP option.
disable ip-option strict-source-route Disables the strict source route IP option.
enable icmp address-mask {vlan <name>} Enables the generation of an ICMP address-
mask reply (type 18, code 0) when an ICMP
address mask request is received.The default
setting is enabled. If a VLAN is not specified,
the command applies to all IP interfaces.
enable icmp parameter-problem {vlan
<name>} Enables the generation of an ICMP
parameter-problem message (type 12) when
the switch cannot properly process the IP
header or IP option information. The default
setting is enabled. If a VLAN is not specified,
the command applies to all IP interfaces.
enable icmp port-unreachables {vlan
<name>} Enables the generation of ICMP port
unreachable messages (type 3, code 3) when a
TPC or UDP request is made to the switch,
and no application is waiting for the request,
or access policy denies the request. The
default setting is enabled. If a VLAN is not
specified, the command applies to all IP
interfaces.
enable icmp redirects {vlan <name>} Enables the generation of an ICMP redirect
message (type 5) when a packet must be
forwarded out on the ingress port. The default
setting is enabled. If a VLAN is not specified,
the command applies to all IP interfaces.
Table 47: ICMP Configuration Commands (continued)
Command Description