Intel 480T, User Manual

Page: 245 / 367

C H A P T E R 1 3 IPX
*
Routing
243
•
show ipxrip
— This command displays the enable status of
IPX/RIP for the VLAN, including operational and administrative
status. It also lists any identified IPX/RIP neighbors, RIP packet
statistics, and several other timer settings.
•
show ipxservice
— This command displays the contents of
the IPX Service Table.
Protocol-Based VLANs for IPX
When combining IPX VLANs with other VLANs on the same
physical port, it may be necessary to assign a protocol filter to the
VLAN. This is especially true if it is not possible to use 802.1Q
VLAN tagging. For convenience, IPX-specific protocol filters have
been defined and named in the default configuration of the switch.
Each filter is associated with a protocol encapsulation type. The
IPX-specific protocol filters and the associated encapsulation type
of each are described in Table 62.
It is not possible to define a protocol-sensitive VLAN for filtering
the IPX
enet_8023
encapsulation type. Instead, use a protocol-
sensitive filter on the other VLANs that share the same ports,
leaving the
enet_8023
encapsulation VLAN configured using the
any
protocol.
Table 62: IPX Protocol Filters and Encapsulation Types
Protocol Name Protocol Filter
Used for Filtering IPX
Encapsulation Type
IPX eypte 0x8137 enet_ii
IPX_8022 llc 0xe0e0 enet_802_2
IPX_snap SNAP 0x8137 enet_snap