IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 396 / 1232

1 Pilot Lamps
8-6
SmartAXIS Touch User’s Manual
■
Recover Background
*1
Select this check box to recover the background of the area where the picture had been displayed after the picture is
switched. When this check box is cleared, the background is filled with the screen's
Background Color .
When parts or drawings are arranged so they overlap the background of the Pilot Lamp (below), the background of
parts and drawings is displayed as follows if the Pilot Lamp picture is hidden.
Can only be set when Picture is selected for Image Type .
However, when the background part is the Alarm List Display, Alarm Log Display, bar chart, line chart, or pie chart,
the missing sections will remain.
■
Coordinates
■
Size
*1 Advanced mode only
Pilot Lamp
Check box cleared Check box selected
Drawing
Since background parts and
drawings are redrawn, they
return to their original state.
The screen is filled with
Background Color, so
background parts and
drawings are missing.
If the Recover Background check box is selected, the number of parts that can be placed on a single
screen decreases. If an error message appears when the Picture Display is displayed on the Touch, clear
the
Recover Background check box or reduce the number of parts.
X, Y: Sets the display position of parts using coordinates.
The X and Y coordinates of parts is defined relative to an origin at the top-left corner of the screen.
X: 0 to (Base Screen horizontal size - 1)
Y: 0 to (Base Screen vertical size - 1)
(0, 0)
X
Y
Screen
Parts
W, H: Sets width and height to define the size of parts.
W: 5 to (Base Screen horizontal size)
H: 5 to (Base Screen vertical size)
Width
Height
Screen
Parts