IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 270 / 1232

3 Text
6-26
SmartAXIS Touch User’s Manual
3.2 Properties of Text dialog box
This section describes items and buttons in the Properties dialog box.
■
Font
Selects the font to use to display text from the following.
Japanese , European , Chinese , Taiwanese , Korean , Central European , Baltic , Cyrillic , Windows
This option can only be configured if the Use Text Manager check box is cleared.
■
Style
Selects the style of text from the following.
Regular , Bold , Shadow
This option can only be configured when Japanese , European , Chinese , Taiwanese , Korean , Central
European , Baltic , or Cyrillic is selected for Font .
■
Align Text Horizontal
Selects text alignment in the horizontal direction.
Left , Center , Right , Center-Left
For details, refer to Appendix “5 Text Alignment” on page A-5.
■
Align Text Vertical
Selects text alignment in the vertical direction.
Top , Center , Bottom
Top when the Vertical Writing check box is selected.
For details, refer to Appendix “5 Text Alignment” on page A-5.
■
Vertical Writing
Select this check box to display text vertically.
This option can only be configured when
Japanese , European , Chinese , Taiwanese , Korean , Central
European , Baltic , or Cyrillic is selected for Font .
When the Vertical Writing check box is selected, take care about the following points. This is applicable
for installations of Windows that support East Asian characters.
• When there is a mixture of double-byte and single-byte characters, the half-width characters are left-
aligned.
• Dashes are displayed horizontally. Symbols representing voiced and semi-voiced sounds of single-byte
characters are shown as follows.
Aligned to
left edge
Horizontal
display
Next
characters