IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 105 / 1232

SmartAXIS Touch User's Manual
3-9
1 Creating WindO/I-NV3 Project Data
3
Pr
oject
●
Screen Tab
■
Type
Select the screens to print from the following items.
All , Base Screen , Popup Screen
■
Range
Select the screens to print from the selected type of screen.
■
Image
■
Screen image only
Prints only the screen type, number, and screen image.
■
Detailed List of Parts
Prints part settings for each screen. This can only be selected when Screen image only is cleared.
■
Device List
Prints device settings for each address. This can only be selected when Screen image only is cleared.
All: Prints all the screens.
Current Screen: Prints the selected editing window screen.
Selected Screens: Prints the selected screens. The selected screens are displayed in a list.
Add: Adds a screen to the list.
Click
Add to display the Open Screens dialog box. Select Screen Type ,
select the screen in Screen List , and then click OK to add the screen to
the list.
Delete: Deletes the screen from the list.
Select the screen in the list, and then click
Delete .
State: Changes the state of the parts for printing. Select the state from the following items.
OFF , ON , ON , OFF (Both)
Zoom: Prints the screen image at the specified magnification (20% to 400%).
Invert white and black: Select this to print the screen by inverting the colors so white is black and black is white.
Overlay Screens: Select this to print the screen by displaying overlay screens.
Show Part Name: Select this to print the screen by displaying part names.
Show Device Address: Select this to print the screen by displaying device addresses.