IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 515 / 1232

SmartAXIS Touch User’s Manual
9-99
7 Alarm Log Display
9
Data Displays
7.1 How the Alarm Log Display is Used
The Alarm Log Display displays Alarm Log data saved in the data storage area.
• List the message, the occurrence time, recovery time, and confirmation time for the alarms that have occurred
• Display the reference screen for alarms that have occurred
7 Alarm Log Display
Occurrence Message Recovered Confirmed
Fcs. Up Fcs. Dwn Ref. REVERSE
12/01 12 : 00 Current fault 12 : 53 12 : 54
Touch
External device
Occurrence Message Recovered Confirmed
Fcs.Up Fcs.Dwn Ref. REVERSE
12/01 12 : 00 Current fault 12 : 53 12 : 54
0 1
12 : 00
0
1
12 : 53
12 : 00
Alarm occurred
12 : 53 Recovered
12 : 54 Confirmed
Recovery time
Confirmation time
Message
Occurrence time
Show focus Move focus
Key Button
Display reference screen
Time
09:15 Motor fault
Message
10:02 Pump1 fault
REV
Up
Dwn
Del
Ref.
10:28 High pressure
13:02 Pump 1 fault
Time
09:15 Motor fault
Message
10:02 Pump1 fault
REV
Up
Dwn
Del
Ref.
10:28 High pressure
13:02 Pump 1 fault
Time
09:15 Motor fault
Message
10:02 Pump1 fault
REV
Up
Dwn
Del
Ref.
10:28 High pressure
13:02 Pump 1 fault
Time
09:15 Motor fault
Message
10:02 Pump1 fault
REV
Up
Dwn
Del
Ref.
10:28 High pressure
13:02 Pump 1 fault
Pump 1 fault Pump 1 fault
Pump 1 output low
Stop Start
Press Stop, check the air,
then press Start.
Air Press.
kg/m 2
0000
Reference screen
Only one Alarm List Display or Alarm Log Display can be configured on a single screen.
• For the key buttons used with the Alarm Log Display, refer to Chapter 7 “Alarm Log Display” on page 7-65.
• When the
Operate the Alarm on List directly check box on the General tab in the Properties of Alarm
Log Display dialog box is selected, a displayed alarm can be given focus by pressing it on the list.
• The number of lines from the start line to the selected line of the message displayed on the Alarm Log
Display is stored in HMI Special Data Register LSD56.