IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 250 / 1232

1 Shapes
6-6
SmartAXIS Touch User’s Manual
●
Properties of Polygon Dialog Box
This section describes items and buttons in the Properties dialog box.
■
Line Width
Selects the line width for the polygon from the following.
1 dot , 2 dots , 3 dots , 5 dots
3 dots and 5 dots can only be configured when Solid is selected for Line Type .
■
Line Type
Selects the line type for the polygon from the following.
Solid , Dot , Dash , Long Dash , Long Dash Dot , Long Dash Dot Dot
Dot , Dash , Long Dash , Long Dash Dot , and Long Dash Dot Dot can only be configured when 1 dot or 2 dots
is selected for Line Width .
■
Foreground Color, Background Color
Selects the foreground color and the background color to use for the polygon (color: 256 colors, monochrome: 8
shades).
Click either button to display the Color Palette. Select a color from the Color Palette.
■
Pattern
Selects the pattern for the polygon.
Click this button to display the Pattern Palette. Select a pattern from the Pattern Palette.
■
Blink
Select this check box to make the polygon blink.
The blink interval is specified with
Blinking Cycle on the System tab in the Project Settings dialog box.
■
Coordinates
■
Size
X, Y: Specifies the display position of the polygon in coordinates.
With the upper-left corner of the screen as the origin, the upper-left corner of the rectangle that
circumscribes the polygon is the X and Y coordinates.
X:
0 to (Base Screen horizontal size - 1)
Y: 0 to (Base Screen vertical size - 1)
(0, 0)
X
Y
Screen
Polygon
W, H: Specifies the size of the polygon in width and height.
W:
1 to (Base Screen horizontal size)
H: 1 to (Base Screen vertical size)
Width
Height
Screen
Polygon