IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 942 / 1232

2 Security Function Configuration Procedure
21-18
SmartAXIS Touch User’s Manual
2.3 Protecting the Display and Operation of Screens and Parts
●
Protecting the Display of Screens
Here you will configure the security group for a screen to protect the display of that screen.
This section describes an example where the display of Base Screen 2 is protected when switching to Base Screen 2
by pressing the Goto Screen Button.
Configuration Procedure
1
Following the procedure in “Creating a User Account” on page 21-8, create the following user account.
To automatically display the Password screen when the user attempts to switch to a Base Screen they cannot access
with the current user account using the Goto Screen Button, in the User Accounts dialog box, in the
Options tab,
select the Require a password automatically check box. For displaying the Password screen, refer to “4.1
Entering the Password on the Touch” on page 21-36.
User2
Goto Screen Button
(Switch to Base Screen 2)
Full
Tank 1
Base Screen 1 Base Screen 2
No user
Touch Touch
Base Screen 2
Can be displayed
Base Screen 2
Cannot be
displayed
To change the user account, a button or command is required to open the Password screen.
User Name
Security Group GroupA
User2