IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 570 / 1232

1 Bar Chart
10-12
SmartAXIS Touch User’s Manual
■
Show Gridline
Select this check box to display grid lines on the chart. Grid lines are displayed above the chart.
■
Show Label
Select this check box to display labels on the scale.
■
Use Text Manager
Select this check box if using the text registered in Text Manager for labels.
Display Position: Select from Scale and Data Over to specify the grid line display position.
Scale: Grid lines are displayed according to the number of major scale divisions.
Can only be set when the Show Ticks check box is selected.
Data Over: Grid lines are displayed at the positions of values specified for Maximum and
Minimum under the Data Over tab.
This option can only be configured when Data Format on the General tab and
Range on the Data Over tab are set to Value .
Line Type: Selects the type of grid lines from the following.
Solid , Dot , Dash , Long Dash , Long Dash Dot , Long Dash Dot Dot
Color: Specifies grid line color (color: 256 colors, monochrome: 8 shades).
Click the
Color button to display the Color Palette. Select a color from the Color Palette.
Grid line
Maximum Minimum
Font: Selects the font for text used in labels from the following.
Japanese , European , Chinese , Taiwanese , Korean , Central European , Baltic , Cyrillic
Can only be set when the Use Text Manager check box is cleared.
The characters that can be displayed depend on the font. For details, refer to Chapter 2 “1.3
Available Text” on page 2-6.
Text ID: Specifies the Text Manager ID No. (1 to 32,000) when text registered in Text Manager are used for
labels.
Click
to display Text Manager.
Can only be set when the Use Text Manager check box is selected.
Text: Inputs characters to be displayed for labels. The maximum number is 40 characters.
The characters that can be entered depend on the font selected using
Font . For details, refer to
Chapter 2 “1.3 Available Text” on page 2-6.
Can only be input when the
Use Text Manager check box is cleared.
When entering Unicode characters click to display the Unicode Input dialog box. Enter the characters
using the Unicode Input dialog box then click OK .
Color: Selects the color of the text used for labels (color: 256 colors, monochrome: 8 shades).
Click the
Color button to display the Color Palette. Select a color from the Color Palette.
If a carriage return (CR) is included, the characters after the CR are not displayed. However, if Windows
Font is set for the specified Text ID, all the characters are displayed.