IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 343 / 1232

SmartAXIS Touch User’s Manual
7-71
5 Multi-Button
7
Bu
ttons
■
Multi-Function
Use this grid to add or edit commands to execute when the Multi-Button is pressed.
Function List: Lists the commands to be executed.
Command Type:
Shows the command type.
Command Name: Shows the command name.
Device:
Shows the setting when one of the following Command Type is selected.
Shows the destination device for the
Bit Write and Word Write commands.
Shows the screen number when Goto Screen is set to Switch to Base
Screen , Open Popup Screen , or Close Popup Screen .
Shows the script ID for the Script command.
• Executes only the Goto Screen command at the end of the Function List when multiple Switch to Base
Screen type commands are set for Action Mode .
• Goto Screen commands are not executed from top to bottom as they appear in the Function List .
Rather, they are executed at the end of the scan of the Touch when the Multi-Button is pressed.
• If multiple Key commands are set, only the first and second Key commands in the Function List are
executed. The third and following Key commands are not executed. Also, only the first Key command that
specifies a Data Transfer function in the
Function List is executed if multiple Key commands are set.
• The function of Key command will affect on the next scan when the trigger condition is satisfied.
Command Type: Select the command to add.
Bit Write: Writes a 0 or 1 to the bit device or bit of the word device. For details, refer to
“Properties of Bit Write for Multi-Functions dialog box” on page 7-73.
Word Write: Writes a value to a word device. Can be used to indirectly specify the destination
address or to perform operations on the written value. For details, refer to
“Properties of Word Write for Multi-Functions dialog box” on page 7-74.
Goto Screen: Switches to another screen or displays a window. For details, refer to “Properties
of Goto Screen for Multi-Functions dialog box” on page 7-76.
Key: Performs a variety of functions including uploading and downloading, copying
files, and operating other parts. For details, refer to “Properties of Key for Multi-
Functions dialog box” on page 7-78.
Script: Executes the script. For details, refer to “Properties of Script for Multi-Functions
dialog box” on page 7-80.
Add: Adds a command to the list. A maximum of 32 commands may be added.
Click this button to display the Properties dialog box for the command selected from
Command
Type .
Edit: Changes a command in the list.
Click this button to display the Properties dialog box for the command selected in
Function List .
Delete: Deletes a command from the list.
Select the command in the list, and then click this button.
Copy: Copies a command in the list.
Select a command in the list, and then click this button. A copy of the selected command is added
to the end of the list.
Up: Shifts the selected command upward in the list.
Down: Shifts the selected command downward in the list.