![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017044.webp)
27
4
REPEATER OPERATION
■
Auto repeater
(USA version only)
The USA version automatically activates the repeater settings
(DUP– or DUP+ and tone encoder ON/OFF)
when the operating
frequency falls within the general repeater output frequency
range and inactivate them when outside of the range.
D
Setting the auto repeater function ON/OFF
q
Push
[PWR]
to turn power OFF.
w
While pushing
[SET•LOCK]
, turn power ON to enter initial
set mode.
e
Push
[SET•LOCK]
or
[S.MW•MW]
several times until
“RPT” appears as shown above right.
r
Rotate
[DIAL]
to select the auto repeater function from
“R1,” “R2” or OFF.
• “R1”: auto repeater is ON, tone encoder is OFF.
• “R2”: auto repeater is ON, tone encoder is ON.
t
Push
[PWR]
to exit initial set mode.
D
Frequency range and offset direction
Auto DUP: ON
Auto tone set: OFF
Auto DUP: ON
Auto tone set: ON
USING
INITIAL SET MODE
[PWR]
[SET•LOCK]
Frequency range
Duplex direction
145.200–145.495 MHz
“DUP–” appears
146.610–146.995 MHz
147.000–147.395 MHz
“DUP” appears
442.000–444.995 MHz
“DUP” appears
447.000–449.995 MHz
“DUP–” appears
ID-800H_1.qxd 2007.06.14 3:09 PM Page 27