1. Charge the PRYMEBLU Wireless PTT
2. Pair the PRYMEBLU Adapter with a wireless headset
3. Pair the PRYMEBLU PTT with the PRYMEBLU Adapter
4. Test and Use.
3
4
Pairing With an Audio Accessory
QUICK START
2
Controls and Connection
Feder
al C
ommunic
ation C
ommission I
nt
er
fer
enc
e S
ta
temen
t
This equipmen
t has been t
est
ed and f
ound t
o c
omply with the limits f
or a Class B
dig
ital devic
e, pursuan
t t
o P
ar
t 15 of the FC
C Rules
. T
hese limits ar
e desig
ned t
o
pr
ovide r
easonable pr
ot
ec
tion against har
mful in
ter
fer
enc
e in a r
esiden
tial
installa
tion.
This equipmen
t gener
at
es uses and can r
adia
te r
adio fr
equenc
y
ener
gy and
, if not installed and used in ac
cor
danc
e with the instruc
tions
, ma
y
cause har
mful in
ter
fer
enc
e t
o r
adio c
ommunica
tions
. Ho
w
ev
er
, ther
e is no
guar
an
tee tha
t in
ter
fer
enc
e will not oc
cur in a par
ticular installa
tion. I
f this
equipmen
t does cause har
mful in
ter
fer
enc
e t
o r
adio or t
elevision r
ec
eption, which
can be det
er
mined b
y tur
ning the equipmen
t off and on, the user is enc
our
aged t
o
tr
y t
o c
or
rec
t the in
ter
fer
enc
e b
y one of the f
ollo
wing measur
es:
-R
eor
ien
t or r
eloca
te the r
ec
eiving an
tenna.
-Incr
ease the separ
ation bet
w
een the equipmen
t and r
ec
eiv
er
.
-C
onnec
t the equipmen
t in
to an outlet on a cir
cuit diff
er
en
t fr
om tha
t t
o which the
rec
eiv
er is c
onnec
ted
.
-C
onsult the dealer or an e
xper
ienc
ed r
adio/T
V t
echnician f
or help
.
FC
C C
aution: A
ny changes or modifica
tions not e
xpr
essly appr
ov
ed b
y the par
ty
responsible f
or c
omplianc
e c
ould v
oid the user's author
ity t
o oper
at
e this
equipmen
t.
This devic
e c
omplies with P
ar
t 15 of the FC
C Rules
. Oper
ation is subjec
t t
o the
follo
wing t
w
o c
onditions: (1)
This devic
e ma
y not cause har
mful in
ter
fer
enc
e, and
(2) this devic
e must ac
cept an
y in
ter
fer
enc
e r
ec
eiv
ed
, including in
ter
fer
enc
e tha
t
ma
y cause undesir
ed oper
ation.
This equipmen
t c
omplies with FC
C RF r
adia
tion e
xposur
e limits set f
or
th f
or an
unc
on
tr
olled en
vir
onmen
t.
To main
tain c
omplianc
e with FC
C RF e
xposur
e
complianc
e r
equir
emen
ts
, please a
void dir
ec
t c
on
tac
t t
o the tr
ansmitting an
tenna
dur
ing tr
ansmitting
.
RF
Exp
osur
e W
arning!
Please keep pr
oduc
t 20cm a
w
ay fr
om y
our
body or b
ystander dur
ing the r
adio oper
ation.
The t
ypical handheld t
w
o-
w
ay r
adios w
er
e
cer
tified under mobile usage c
ondition
(i.e
. keep 20cm a
w
ay fr
om the user body)
and use of such r
adio closer than 20cm ma
y
ex
ceed the US RF e
xposur
e limit
and shall be a
voided
.
version 1.0 December 2010
91
1 Mariner St., Brea, CA
92821
PH: 714.257.0300 F
AX: 714.257.0600
TOLL
FREE: 800.666.2654 WWW
.PR
YME.COM
PR
YMEBLU
®
PUSH-TO-T
ALK USER’S GUIDE
For use with PR
YMEBLU wireless
Bluetooth Adapters (Sold Separately)
The PR
YMEBLU BT
-PTT allo
ws you to Push-to-T
alk wirelessly
over your two-way radio when using with a PR
YMEBLU
Ada
pter
and a compa
tible wireless headset.
PR
YME® and PR
YME BLU™ are trademarks o
wned by PR
YME Radio Products,
Brea CA.
All other product or ser
vice names are the property of their respective o
wners.
© 2010 PR
YME Radio Products,
Brea CA.
All Rights Reser
ved
This manual applies to the
PR
YMEBLU BT
-PTT Wireless
Push-to-T
alk transmitter
.
The PR
YMEBLU PTT works
with all PR
YMEBLU BT
-500
series Bluetooth Adapters.
PR
YMEBLU PTT
Model No.: BT
-PTT
Made in T
aiwan
FCC ID N2E-BT
-PTT
STEP ONE: Charging the PRYMEBLU PTT
The PRYMEBLU PTT has an internal Lithium Ion rechargeable battery pack which must be charged prior
to operation, and must be recharged regularly. A fully charged battery will provide approximately 12
hours (or more) of operation before needing to be recharged.
To charge the PRYMEBLU PTT:
* Ensure the PRYMEBLU PTT is turned off, using the switch located on the back of the device.
* Plug the supplied wall charger into an AC (110V) wall outlet.
* Plug the charger into charge jack on the bottom of the PRYMEBLU Adapter. You will need to remove
the protective rubber cover that is inserted into the charge jack. (To prevent dust and moisture from
damaging your PTT, always ensure this cover is in place when you are not charging the PRYMEBLU PTT.)
* The PRYMEBLU PTT takes approximately 4.5 hours to charge. Actual charge time will vary depending
on several factors including the battery’s charge state, condition, and age.
Charging Cautions:
- Use only the wall charger supplied by the manufacturer. Do not use any other charger.
- Do not use a wall charger that appears to be damaged. (Example: frayed wires, melted plastic, etc.)
Contact PRYME to get a new manufacturer-approved replacement charger.
- Do not tamper with or modify the PRYMEBLU PTT or charger.
-Always turn the power switch to the Off position when charging the PRYMEBLU PTT.
STEP TWO: Pairing the PRYMEBLU Adapter and Wireless Headset
In order to operate, the PRYMEBLU PTT must be paired to PRYMEBLU Adapter (BT-500 series).
However, The PRYMEBLU Adapter must first be paired to a wireless Bluetooth headset. To pair these
devices, follow this procedure:
Pairing the PRYMEBLU Adapter and Bluetooth Headset
* The PRYMEBLU Adapter must be connected to a compatible radio with a freshly charged battery.
Ensure the two-way radio, Bluetooth headset, and PRYMEBLU PTT are all powered off.
* Place the PRYMEBLU Adapter in Accessory Pairing mode. To do this, turn the two-way radio on while
holding down the Talk button on the PRYMEBLU Adapter. Continue to hold the Talk button down for
approximately three seconds. Release the Talk button when the status LED flashes two times per
second. The PRYMEBLU Adapter is now in audio accessory pairing mode.
* Activate the pairing mode on your Bluetooth headset by following the instructions provided by the
headset’s manufacturer. Once the wireless audio accessory and PRYMEBLU Adapter are paired with
each other, the status
LED on the PRYMEBLU Adapter will show a constant blue light for three seconds.
* Once the headset and PRYMEBLU Adapter have been successfully paired, turn off the two-way radio
and Bluetooth headset and wait at least three seconds.
Pairing the PRYMEBLU Adapter and PRYMEBLU PTT
* Turn on the two-way radio while holding down the Talk button on the PRYMEBLU Adapter. Continue
to hold the Talk button down for approximately three seconds. Release the Talk button when the
status LED flashes two times per second. Then, press the Talk button again. The LED should now flash
three times per second, indicating that the PRYMEBLU Adapter is now in PTT Pairing mode.
* Place the PRYMEBLU PTT in pairing mode by holding down the Push-To-Talk button while moving
the power switch to the On position. Continue to hold down the Push-To-Talk button until the LED
indicator on the PRYMEBLU PTT flashes blue continuously. You can then release the Push-to-Talk
button. The PRYMEBLU PTT is now in pairing mode.
* Once the PRYMEBLU Adapter and PRYMEBLU PTT are paired with each other, the status LED on the
PRYMEBLU Adapter will show a constant blue light for three seconds and the LED on the PTT will show
one blue flash every second.
* If the PRYMEBLU Adapter or PRYMEBLU PTT does not detect a compatible wireless accessory within
60 seconds of being put into pairing mode, the devices will exit the pairing mode and resume normal
operation.
* After pairing is successful, turn off the PRYMEBLU PTT and the two-way radio that the PRYMEBLU
Adapter is attached. Wait at least three seconds.
USING THE FRICTION PAD
The PRYMEBLU PTT is supplied with a rubber Friction Pad. This pad provides additional protection and
stability when using the Velcro Fastener on the back of the PRYMEBLU PTT to attach the device to an
automobile steering wheel, gearshift, or any other location.
To install the rubber Friction Pad do the following:
1. Open the Velcro Fastener on the back of the
PRYMEBLU PTT so that the two straps are separated.
2. Align the Friction Pad so that it is centered over the
Velcro Fastener on the back of the PRYMEBLU PTT.
3. Slide one strap of the Velcro Fastener into one
of the slots in the Friction Pad and pull the strap through.
4. Slide the other Velcro Fastener strap through the other slot in the Friction Pad.
5. Place the PRYMEBLU PTT in the position you wish to mount it and close the Velcro Fastener.
Push-To-Talk Button
When paired with a PRYMEBLU Adapter
and wireless headset, this button functions
as a Push-to-Talk, causing the two-way radio
to transmit when the switch is pressed.
LED Indicator
The LED flashes messages that let
the user know the current status of
the PRYMEBLU PTT.
Charge Jack
This jack is used to connect the
PRYMEBLU PTT to the supplied
wall charger.
Lanyard Attachment Point
Allows attachment of a wrist strap
or lanyard to the PRYMEBLU PTT.
Velcro Fastener
The Velcro strap on the back of the
PRYMEBLU PTT rotates 360° and allows
the PRYMEBLU PTT to be securely attached
in many convenient locations, such as to
the user’s clothing, around the user’s fingers,
on an automobile steering wheel, on duty
gear, and many more!
Power Switch
Turns the
PRYMEBLU PTT
on and off.
ON
ON
