![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017029.webp)
12
2
SETTING A FREQUENCY
2
■
Using the tuning dial
q
Rotate
[DIAL]
to set the frequency.
• If VFO mode is not selected, push
[V/MHz•SCAN]
to select VFO
mode.
• The frequency changes in the selected tuning steps. (p. 13)
w
To change the frequency in 1 MHz
(10 MHz for some versions)
steps, push
[V/MHz•SCAN]
, then rotate
[DIAL]
.
• Pushing and holding
[V/MHz•SCAN]
for 1 sec. starts scan func-
tion. If scan starts, push
[V/MHz•SCAN]
again to cancel it.
■
Using the [
Y
Y
]/[
Z
Z
] keys
➥
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired frequency.
• Pushing and holding
[
Y
Y
]
/
[
Z
Z
]
for 1 sec. activates a
scan. If scan starts, push
[
Y
Y
]
/
[
Z
Z
]
or
[
CLR
A(MW)]
to
cancel it.
■
Using the keypad
The frequency can be directly set via numeral keys on the mi-
crophone.
z
Push
[VFO/LOCK]
to select VFO mode, if nec-
essary.
x
Push
[
ENT
C(T-OFF)]
to activate the keypad for
digit input.
c
Push 6 keys to input a frequency.
• When a digit is mistakenly input, push
[
ENT
C(T-OFF)]
to clear the input, then repeat input from the 1st digit.
• Pushing
[
CLR
A(MW)]
clears input digits and retrieves
the frequency.
Push
Push
Push
Push
[EXAMPLE]:
Setting frequency to 145.3625 MHz.
ENT
C
YZ
While 1 MHz tuning step is
selected, the digit below
100 kHz disappear.
While 10 MHz tuning step
is selected, the digit below
1 MHz disappear.
[DIAL]
[V/MHz•SCAN]
ID-800H_1.qxd 2007.06.14 3:09 PM Page 12