28
5
MEMORY OPERATION
4
5
■
General description
The transceiver has 512 memory channels including 10 scan
edge memory channels (5 pairs), and 2 call channels. Each of
these channels can be individually programmed with operat-
ing frequency
(pgs. 11, 12)
, duplex direction
(pgs. 21, 22)
and
offset
(p. 26)
, subaudible tone encoder or tone squelch and its
tone frequency
(pgs. 21–24, 55, 56)
, skip information
(p. 47)
and
call sign memory number
(station and repeater; pgs. 61–64)
.
In addition, a total of 10 memory banks, A to J, are available
for usage by group, etc.
■
Memory channel selection
D
Using the tuning dial
q
Push
[M/CALL•PRIO]
several times to select memory
mode.
• “
!
” indicator appears
w
Rotate
[DIAL]
to select the desired memory channel.
• Programmed memory channels only can be selected.
D
Using the [
Y
Y
]/[
Z
Z
] keys
z
Push
[MR/CALL]
to select memory mode.
x
Push
[
Y
Y
]
or
[
Z
Z
]
to select and set the desired
memory channel.
• Pushing and holding
[
Y
Y
]
/
[
Z
Z
]
for 1 sec. activates a
scan.
• If scan is activated, push
[
Y
Y
]
/
[
Z
Z
]
again or push
[
CLR
A(MW)]
to stop it.
D
Using the keypad
z
Push
[MR/CALL]
to select memory mode.
x
Push
[
ENT
C(T-OFF)]
to activate the keypad
for numeral input.
c
Push 3 appropriate digit keys to input a chan-
nel number.
• Blank channel can be selected.
• Push only 1 appropriate digit key,
[
MONI
1(BANK)]
,
[
SCAN
2(T-SCAN)]
,
[
PRIO
3(PTT-M)]
,
[
HIGH
4(DTCS)]
or
[
MID
5(DTCS
S
S
)]
then push
[
M
M
(TONE-1)]
or
[
SQL
Z
Z
#(16KEY-L)]
to select scan
edge channels. “
M
M
” and “#” can be used for “A”
and “B” respectively.
MR/CALL
MR/CALL
Y
/
Z
[M/CALL•PRIO]
“
!
” appears
ID-800H_1.qxd 2007.06.14 3:09 PM Page 28
