![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017014.webp)
VII
QUICK REFERENCE GUIDE
■
Your first contact
Now that you have your ID-800H installed in your car or
shack, you are probably excited to get on the air. We would
like to take you through a few basic operation steps to make
your first “On The Air” an enjoyable experience.
1. Turning ON the transceiver
Before powering up your ID-800H, you may want to make
sure the audio volume and squelch level controls are set in
9–10 o’clock positions.
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the quality control process. Resetting the CPU is neces-
sary to start from factory default.
➥
While pushing both
[SET•LOCK]
and
[S.MW•MW]
, push
and hold
[PWR]
for 1 sec. to reset the CPU.
2. Selecting the operating frequency band
The ID-800H has 2 m and 70 cm transmittable bands.
➥
Push
[BAND•MODE]
momentarily to enter band selection
mode.
➥
Rotate
[DIAL]
to select the desired frequency band, then
push
[BAND•MODE]
to set the selected band.
[DIAL]
[BAND•MODE]
[PWR]
[SET•LOCK]
[S.MW•MW]
[VOL]
[SQL]
ID-800H_1.qxd 2007.06.14 3:09 PM Page VII