![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017050.webp)
33
5
MEMORY OPERATION
■
Programming channel names
Each memory channel and the call channel can be pro-
grammed with an alphanumeric channel name for easy
recognition and can be indicated independently by channel.
Names can be a maximum of 6 characters— see the table
below for available characters.
q
Push
[S.MW•MW]
momentarily.
• “
!
” and memory channel number blink.
w
Rotate
[DIAL]
to select the desired memory or call chan-
nel.
e
Push
[BAND•MODE]
to select the memory name pro-
gramming condition.
• Frequency readouts disappear and a cursor blinks.
r
Rotate
[DIAL]
to select the desired character.
• The selected character blinks.
t
Push
[SET•LOCK]
to move the cursor to the right.
y
Repeat steps
r
and
t
until the desired channel names
are displayed.
u
Push and hold
[S.MW•MW]
for 1 sec. to program the
name and exit the channel name programming condition.
(1)
(B)
(L)
(V)
(+)
(2)
(C)
(M)
(W)
(–)
(3)
(D)
(N)
(X)
(=)
(4)
(E)
(O)
(Y)
(
✱
)
(5)
(F)
(P)
(Z)
(/)
(6)
(G)
(Q)
(space)
(7)
( ( )
(H)
(R)
( ) )
(8)
(I)
(S)
(|)
(9)
(J)
(T)
(0)
(A)
(K)
(U)
[EXAMPLE]:
Programming “CLUB” into memory channel 1.
Rotate
Push
Push
Rotate
Push for 1 sec.
Repeat the
previous
steps.
Beep
Beep
Beep
“
“
“
“
“
Push
ID-800H_1.qxd 2007.06.14 3:09 PM Page 33