32
5
MEMORY OPERATION
5
D
Memory/call
➪
call/memory
q
Select the memory/call channel to be transferred.
➥
Push
[M/CALL•PRIO]
several times to select memory
mode or call channel, then rotate
[DIAL]
or push
[BAND•MODE]
to select the desired memory or call
channel respectively.
w
Push
[S.MW•MW]
momentarily.
• “
!
” indicator and “-- -- --” indication blink, and shows VFO con-
ditions.
e
Rotate
[DIAL]
to select the target memory channel.
• “C1” or “C2” blinks when the call channel is selected.
• Scan edge channels, 1A/1B, 2A/2B, 3A/3B, 4A/4B, 5A/5B can
also be selected.
r
Push and hold
[S.MW•MW]
for 1 sec. to transfer the se-
lected memory/call channel contents to the target memory.
• The targeted memory and transferred contents are indicated.
z
Select the memory/call channel to be trans-
ferred.
➥
Push
[MR/CALL]
to select memory mode,
then select the desired memory channel
via
[
Y
Y
]
/
[
Z
Z
]
or keypad.
➥
Push and hold
[MR/CALL]
for 1 sec. then
push
[BAND]
to select the desired call
channel.
x
Push
[FUNC]
, then
[
CLR
A(MW)]
momentarily.
• “
!
” indicator and “-- -- --” indication blink, and
shows VFO conditions.
c
Push
[
Y
Y
]
/
[
Z
Z
]
to select the target memory
channel.
• “C1” or “C2” blinks when the call channel is selected.
• Scan edge channels can also be selected.
• The keypad cannot be used for the selection.
v
Push
[FUNC]
then push
[
CLR
A(MW)]
for
1 sec. to transfer the selected memory/call
channel contents to the target channel.
• The targeted channel and transferred contents
are indicated.
MR/CALL
MW
BAND
[
Y
]/[
Z
]
[EXAMPLE]:
Transferring memory channel 30 contents to channel 31.
Select the target channel.
Push for 1 sec.
Push then push for 1 sec.
Select the memory channel, then push .
Select the memory channel, push then push .
Front panel operation:
HM-133 operation:
ID-800H_1.qxd 2007.06.14 3:09 PM Page 32
