![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017093.webp)
76
11
DIGITAL MODE OPERATION
11
z
Set the desired repeater’s frequency, offset and
shift direction in VFO mode.
(p. 22)
• Select “DV” mode in advance. (p. 15)
x
Set your own call sign.
(p. 65)
• See p. 62 for your own call sign programming.
c
Set the desired station call sign.
(pgs. 66, 67)
• When making a CQ call
Set the desired repeater’s
(in a different zone)
call
sign, for the area you want to make a CQ call,
into “UrCALL.”
• See p. 64 for station call sign programming.
v
Set the repeater’s call sign as follows;
a
Push
[
SET
B(D-OFF)]
to enter call sign set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “CALL” if necessary.
s
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
several
times to select “RPT1 C.”
d
Push
[
Y
Y
]
or
[
Z
Z
]
to select the nearest re-
peater’s call sign.
f
Push
[
SET
B(D-OFF)]
for 1 sec. to set the call
sign for “RPT1 C.”
g
Push
[
SET
B(D-OFF)]
to select “RPT2 C.”
h
Push
[
Y
Y
]
or
[
Z
Z
]
to select the gateway re-
peater’s
(in the same zone)
call sign.
• The call sign should have “G” setting as the 8th digit.
• Push
[SET•LOCK]
or
[S.MW•MW]
to display last 6-
digit or first 6-digit of the call sign, respectively.
j
Push
[
SET
B(D-OFF)]
for 1 sec. to set the call
sign for “RPT2 C.”
k
Push
[
CLR
A(MW)]
to exit call sign set mode.
b
Push
[PTT]
to transmit; release to receive.
■
Received call sign
When a call in digital voice mode is received, the calling sta-
tion and using repeater call signs being used can be stored
into the received call record. The stored call signs are view-
able in the following manner.
D
D
Desired call record indication
q
Push
[SET•LOCK]
to enter call sign set mode.
• Rotate
[DIAL]
to select “CALLS” if necessary.
w
Push
[SET•LOCK]
or
[S.MW•MW]
several times to select
the received call indication.
• “RXCALL,” “RXRPT1,” and “RXRPT2” are available for the re-
ceived station, repeater 1 and repeater 2 call signs, respectively.
e
To confirm the received call, push
[BAND•MODE]
to enter
the received call sign indication mode.
• When “RXCALL” is selected in step
w
, the additional note can
be displayed by pushing
[BAND•MODE]
.
• Push
[SET•LOCK]
or
[S.MW•MW]
to display last 6-digit or first
6-digit of the received call sign, respectively.
• Push
[BAND•MODE]
once or twice to exit the indication mode.
r
Push one of
[TONE•T-SCAN•BK]
,
[LOW•DUP]
or
[MONI•DTMF•EMR]
to exit call sign set mode.
SET
B
ID-800H_1.qxd 2007.06.14 3:09 PM Page 76