![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017071.webp)
54
9
DTMF MEMORY ENCODER
9
D
Manual transmission
z
Deactivate the DTMF memory encoder by
pushing
[FUNC]
then
[
SET
B(D-OFF)]
.
x
Push
[DTMF-S]
to turn the DTMF direct selec-
tion ON.
• The function indicator (microphone) lights green.
c
Push one of “0” to “9” and “A” to “F” keys mo-
mentarily, then push the desired DTMF keys,
0–9 and A to F.
• A:
[
CLR
A(MW)]
B:
[
SET
B(D-OFF)]
,
C:
[
ENT
C(T-OFF)]
D:
[
SQL
Y
Y
D(MUTE)]
,
E:
[
M
M
(TONE-1)]
F:
[
SQL
Z
Z
#(16KEY-L)]
• Automatically transmits without pushing PTT.
• The first code, one of “0” to “9” and “A” to “F,” is not
transmitted. DTMF code transmission starts from
the 2nd code.
v
Push
[DTMF-S]
again to deactivate the DTMF
direct selection.
■
DTMF speed
The rate at which DTMF memories send individual DTMF
characters can be set to accommodate operating needs.
q
Push
[PWR]
for 1 sec. to turn power OFF.
w
While pushing
[SET•LOCK]
, push
[PWR]
for 1 sec. to turn
power ON and enter initial set mode.
e
Push
[SET•LOCK]
or
[S.MW•MW]
several times until
“DTD” appears as shown above.
r
Rotate
[DIAL]
to select the desired speed as shown in the
table below.
t
Push
[PWR]
to exit initial set mode.
cps=characters/sec
The display shows the fastest
DTMF speed is selected.
USING
INITIAL SET MODE
DTMF-S
DISPLAY
INTERVAL
SPEED
DTD-- 1
100 msec.
5.0 cps
DTD-- 2
200 msec.
2.5 cps
DTD-- 3
300 msec.
1.6 cps
DTD-- 5
500 msec.
1.0 cps
ID-800H_1.qxd 2007.06.14 3:09 PM Page 54