![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017102.webp)
85
11
DIGITAL MODE OPERATION
z
Set the operating frequency, call signs and other
settings, such as repeater, as desired.
x
Push
[
SET
B (D-OFF)]
to enter message set
mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “MESSAG” if necessary.
c
Push
[
SET
B(D-OFF)]
or
[
ENT
C (T-OFF)]
several
times until “TXM-C” appears.
v
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired message
channel.
b
Push
[
ENT
C(T-OFF)]
then
[
Y
Y
]
to select “TXM-
ON.”
n
Push
[
CLR
A(MW)]
to exit message set mode.
m
Push
[PTT]
to transmit and send the selected
message simultaneously.
D
D
RX message indication
When a call with a message is received, the message can be
stored into the RX message record.
The message is cleared once turning power OFF, or over-
written when another message is received.
q
When the call with a message is received, the digital mes-
sage indicator blinks.
w
Push
[SET•LOCK]
to enter message set mode.
• Rotate
[DIAL]
to select “MESSAG,” if necessary.
e
Push
[SET•LOCK]
or
[S.MW•MW]
several times until “RX-
MSG” or “RX-CAL” appears.
• When “RX-CAL” is displayed, rotate
[DIAL]
to select “RX-MSG.”
• When “RX-CAL” is selected, the station call sign, that the mes-
sage is send, is displayed at the next step.
Push
[SET•LOCK]
or
[S.MW•MW]
to display last 6-digit or first
6-digit of the call sign, respectively, in this case.
SET
B
ID-800H_1.qxd 2007.06.14 3:09 PM Page 85