41
6
CALL CHANNEL OPERATION
■
Programming a call channel
Operating frequency, duplex information, subaudible tone in-
formation (tone encoder or tone squelch ON/OFF and its fre-
quency) can be programmed into the call channel.
q
Set the desired frequency in VFO mode.
➥
Push
[V/MHz•SCAN]
to select VFO mode.
➥
Set the frequency using
[DIAL]
.
➥
Set other data as desired.
w
Push
[S.MW•MW]
momentarily.
e
Rotate
[DIAL]
to select the desired call channel.
• “
!
” indicator and “C1” or “C2” blink.
r
Push and hold
[S.MW•MW]
for 1 sec. to program.
• 3 beeps sound and the unit returns to VFO mode automatically.
z
Set the desired frequency in VFO mode.
➥
Push
[VFO/LOCK]
to select VFO mode.
➥
Set the frequency.
➥
Set other data as desired.
x
Push
[FUNC]
, then
[
CLR
A(MW)]
momentar-
ily.
c
Select the call channel via
[
Y
Y
]
or
[
Z
Z
]
.
v
Push
[FUNC]
, and then push and hold
[
CLR
A(MW)]
for 1 sec. to program.
• 3 beeps sound and the unit returns to VFO
mode automatically.
MW
[
Y
]/[
Z
]
VFO/LOCK
[EXAMPLE]:
Programming 145.120 MHz into the call channel 2 via the microphone.
Set the frequency.
Push to select VFO mode.
Push , then .
Push , then push for 1 sec.
➠
Push until “C2” appears.
Beep
Beep
Beep
“
“
“
“
“
ID-800H_1.qxd 2007.06.14 3:09 PM Page 41
