![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017070.webp)
53
9
DTMF MEMORY ENCODER
■
Transmitting a DTMF code
D
Automatic transmission (DTMF memory)
q
Push
[MONI•DTMF]
for 1 sec.
(or until 1 short and 1 long
beeps sound in DV mode; U.S.A. version only)
to turn the DTMF
memory encoder ON.
• “d” appears in place of 100 MHz digit.
w
Push
[SET•LOCK]
to enter DTMF memory programming
condition.
e
Rotate
[DIAL]
to select the desired DTMF memory channel.
r
Push
[PTT]
to transmit the selected DTMF memory content.
t
Push
[MONI•DTMF]
for 1 sec. to cancel the DTMF en-
coder.
• When the DTMF encoder is turned ON continuously, each push
of the PTT transmits the previously selected DTMF code.
z
Push
[FUNC]
then
[
LOW
6(DTMF)]
to turn the
DTMF memory encoder ON.
• “d” appears in place of 100 MHz digit.
x
Push
[
SET
B(D-OFF)]
to enter the DTMF mem-
ory programming condition.
c
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired channel.
v
Push
[PTT]
to transmit the selected memory.
• Exit the programming condition automatically.
• Each push of
[PTT]
transmits the DTMF code.
b
Push
[FUNC]
then
[
SET
B(D-OFF)]
to cancel the
DTMF memory encoder.
• When the DTMF encoder is turned ON continuously,
each push of the PTT transmits the previously se-
lected DTMF code.
D
Transmitting a DTMF memory directly
z
Push
[FUNC]
then
[
LOW
6(DTMF)]
to turn the
DTMF memory encoder ON.
• “d” appears in place of 100 MHz digit.
x
Push
[DTMF-S]
to turn the DTMF memory di-
rect selection ON.
• The function indicator (microphone) lights green.
c
Push the desired DTMF channel.
• “0” to “9” and “A” to “D” are available for DTMF
memory channels.
• The selected DTMF code is automatically transmit-
ted without pushing PTT.
NOTE:
When no DTMF code programmed
channel number is pushed, it transmits the rela-
tive DTMF code as the manual transmission de-
scribed in the next page.
v
Push
[DTMF-S]
again to deactivate the DTMF
memory direct selection.
b
Push
[FUNC]
then
[
SET
B(D-OFF)]
to cancel
the DTMF memory encoder.
NOTE for DTMF operation (U.S.A. version only)
In DV mode, microphone audio is also transmitted simul-
taneously during DTMF code transmission. Therefore, the
DTMF operation cannot be guaranteed.
DTMF-S
DTMF
ID-800H_1.qxd 2007.06.14 3:09 PM Page 53