![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017128.webp)
111
12
OTHER FUNCTIONS
D
D
Weather channel selection
q
Push
[M/CALL•PRIO]
several times to select weather
channel group.
w
Rotate
[DIAL]
to select the desired weather channel.
e
Push
[M/CALL•PRIO]
to select memory mode, or push
[V/MHz•SCAN]
to select VFO mode.
D
D
Weather alert function
NOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the selected weather channel is moni-
tored each 5 sec. for the announcement. When the alert sig-
nal is detected, the “AL.T” and the WX channel are displayed
alternately and sounds a beep tone until the transceiver is op-
erated. The previously selected (used) weather channel is
checked periodically during standby or while scanning.
q
Select the desired weather channel.
w
Turn the weather alert function ON in set mode.
➥
Push
[SET•LOCK]
to enter set mode.
• Rotate
[DIAL]
to select “SET,” if “CALLS” or “MESSAG” is dis-
played.
➥
Push
[SET•LOCK]
or
[S.MW•MW]
to select the weather
alert item, then rotate
[DIAL]
to set ON.
➥
Push any key below the display to exit set mode.
[SET•LOCK]
[S.MW•MW]
Weather channel group indication
[M/CALL•PRIO]
■
Weather channel operation
(USA version only)
ID-800H_1.qxd 2007.06.14 3:09 PM Page 111