![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017061.webp)
44
7
SCAN OPERATION
7
z
Push
[VFO/LOCK]
to select VFO mode for
full/programmed scan; push
[MR/CALL]
to se-
lect memory mode for memory scan.
• Push
[FUNC]
then
[
MONI
1(BANK)]
to select a bank
for bank scan.
x
Push
[
SQL
Y
Y
D(MUTE)]
or
[
SQL
Z
Z
#(16KEY-L)]
to
set the squelch to the point where noise is just
muted.
c
Push
[
SCAN
2(T-SCAN)]
to start the scan.
• Push and hold
[
Y
Y
]
or
[
Z
Z
]
for 1 sec. also starts the
scan.
v
Push
[
SET
B(D-OFF)]
to switch full and pro-
grammed scan (P1, P2, P3, P4 and P5), if VFO
is selected in step
z
.
b
To stop the scan push
[
SCAN
2(T-SCAN)]
or
[
CLR
A(MW)]
.
NOTE:
When AM, FM or DV mode frequencies are pro-
grammed into memory channels disorderly, memory scan
takes a lot of time (very slow). Because changing modes
takes a time. In this case, assign the AM, FM and DV
mode frequencies into the separate bank respectively. And
using the bank scan is helpful.
SCAN
2
SET
B
ID-800H_1.qxd 2007.06.14 3:09 PM Page 44