73
11
DIGITAL MODE OPERATION
D
D
Repeater operation in the same zone
q
Set the desired repeater’s frequency, offset and shift direc-
tion in VFO mode.
(p. 21)
• Select “DV” mode in advance. (p. 15)
w
Set your own call sign.
(p. 65)
• See p. 61 for your own call sign programming.
e
Set the desired station call sign.
(pgs. 66, 67)
• See p. 63 for station call sign programming.
r
Set the repeater’s call sign as follows;
a
Push
[SET•LOCK]
to enter call sign set mode.
• Rotate
[DIAL]
to select “CALL” if necessary.
s
Push
[SET•LOCK]
or
[S.MW•MW]
several times to se-
lect “RPT1 C.”
d
Rotate
[DIAL]
to select the nearest repeater’s call sign.
f
Push
[SET•LOCK]
for 1 sec. to set the call sign for
“RPT1 C.”
g
Push
[SET•LOCK]
to select “RPT2 C.”
h
Rotate
[DIAL]
to select the desired repeater’s
(in the
same zone)
call sign.
• Select “r - - (NOTUSE)” when not operating RPT2.
j
Push
[SET•LOCK]
for 1 sec. to set the call sign for
“RPT2 C.”
k
Push one of
[TONE•T-SCAN•BK]
,
[LOW•DUP]
or
[MONI•DTMF•EMR]
to exit call sign set mode.
t
Push
[PTT]
to transmit; release to receive.
z
Set the desired repeater’s frequency, offset and
shift direction in VFO mode.
(p. 22)
• Select “DV” mode in advance. (p. 15)
x
Set your own call sign.
(p. 65)
• See p. 62 for your own call sign programming.
c
Set the desired station call sign.
(pgs. 66, 67)
• See p. 64 for station call sign programming.
v
Set the repeater’s call sign as follows;
a
Push
[
SET
B(D-OFF)]
to enter call sign set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “CALL” if “SET” or “MES-
SAG” is displayed.
s
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
sev-
eral times to select “RPT1 C.”
d
Push
[
Y
Y
]
or
[
Z
Z
]
to select the nearest re-
peater’s call sign.
f
Push
[
SET
B(D-OFF)]
for 1 sec. to set the call
sign for “RPT1 C.”
g
Push
[
SET
B(D-OFF)]
to select “RPT2 C,” then
push
[BAND]
.
h
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired re-
peater’s
(in the same zone)
call sign.
• Select “r - - (NOTUSE)” when not operating RPT2.
j
Push
[
SET
B(D-OFF)]
for 1 sec. to set the call
sign for “RPT2 C.”
k
Push
[
CLR
A(MW)]
to exit call sign set mode.
b
Push
[PTT]
to transmit; release to receive.
SET
B
ID-800H_1.qxd 2007.06.14 3:09 PM Page 73