![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017103.webp)
86
11
DIGITAL MODE OPERATION
11
r
Push
[BAND•MODE]
to display the message, then push
[SET•LOCK]
or
[S.MW•MW]
several times to scroll the
message.
t
Push
[M/CALL•PRIO]
,
[TONE•T-SCAN•BK]
,
[LOW•DUP]
or
[MONI•DTMF•EMR]
to exit the message set mode.
z
When the call with a message is received, the
digital message indicator blinks.
x
Push
[
SET
B (D-OFF)]
to enter message set
mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “MESSAG” if necessary.
c
Push
[
SET
B(D-OFF)]
or
[
ENT
C (T-OFF)]
several
times to select “RX-MSG” or “RX-CAL.”
• When “RX-CAL” is displayed, push
[
Y
Y
]
or
[
Z
Z
]
to se-
lect “RX-MSG,”
v
Push
[BAND]
to display the message.
b
Push
[
SET
B(D-OFF)]
or
[
ENT
C (T-OFF)]
to scroll
the message.
n
Push
[
CLR
A(MW)]
to exit the message set mode.
For your information
When “Auto RX message Display (RMD)”
(p. 101)
is set to
ON, the received message will be displayed and scrolls auto-
matically.
■
Break-in communication
The break-in function allows you to break into an another sta-
tion’s communications in both digital voice and low-speed
data operation.
q
While receiving an another station’s communication, push
and hold
[TONE•T-SCAN•BK]
until 2 regular and 2 long
beeps sound to turn the break-in setting ON.
• “BK” appears.
• When a call sign has not been received correctly, “NoCALL” is
displayed and “BK” won’t be appears. Receive the call sign in-
cluded in a communicating signal again, or set the call sign man-
ually in this case.
w
When both stations are in standby, transmit to send a
break-in call.
• Programmed call sign station receives the break-in call as well
as your call sign.
e
Wait for the reply call from the station who receives the
break-in call.
r
After receiving the reply call, communicate normally.
t
To cancel the break-in, push and hold
[TONE•T-SCAN•BK]
for 1 sec. to turn OFF.
SET
B
Scroll indicator appears
ID-800H_1.qxd 2007.06.14 3:09 PM Page 86