![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017034.webp)
17
3
BASIC OPERATION
■
Squelch attenuator
The transceiver has an RF attenuator related to the squelch
level setting. Approx. 10 dB attenuation is obtained at maxi-
mum setting.
The squelch attenuator allows you to set a minimum signal
level needed to open the squelch. The attenuator function can
be deactivated in initial set mode.
➥
Rotate
[SQL]
clockwise past the 12 o’clock position to ac-
tivate the squelch attenuator.
• “ATT” appears when the squelch attenuator is activated.
• Attenuation level can be adjusted up to 10 dB (approx.) between
12 o’clock and fully clockwise position.
• When setting the squelch from the microphone, a level greater
than ‘19’ activates the squelch attenuator.
NOTE:
The squelch attenuator functions even when the
monitor function is in use. Thus set
[SQL]
control within 10
to 12 o’clock position is recommended when using the
monitor function.
D
Squelch attenuator setting
q
Turn the transceiver power OFF.
w
While pushing
[SET•LOCK]
, turn the power ON to enter ini-
tial set mode.
e
Push
[SET•LOCK]
or
[S.MW•MW]
to select “ATT” (squelch
attenuator) item.
r
Rotate
[DIAL]
to toggle the function ON and OFF.
• Select “OF” to deactivate the squelch attenuator function.
t
Push
[PWR]
to exit initial set mode.
[PWR]
[SET•LOCK]
USING
INITIAL SET MODE
Squelch is
open.
Squelch
attenuator
Squelch
threshold
Shallow
Deep
Noise squelch
ID-800H_1.qxd 2007.06.14 3:09 PM Page 17