![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017038.webp)
■
Accessing a repeater
q
Set the receive frequency
(repeater output frequency)
.
(pgs. 11, 12)
w
Push and hold
[LOW•DUP]
for 1 sec. once or twice, to se-
lect minus duplex or plus duplex.
• “DUP–” or “DUP” appears to indicate the transmit frequency for
minus shift or plus shift, respectively.
• When the auto repeater function is turned ON (available for the
USA version only), steps
w
and
e
are not necessary. (p. 27)
e
Push
[TONE•T-SCAN]
several times to turn ON the sub-
audible tone encoder, according to repeater requirements.
• “T” appears
• 88.5 Hz is set as the default; refer to p. 23 for tone frequency
settings.
• When the repeater requires a different tone system, see p. 25.
r
Push and hold
[PTT]
to transmit.
• The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
• If “OFF” appears, confirm that the offset frequency (p. 26) is set
correctly.
t
Release
[PTT]
to receive.
y
Push
[MONI•DTMF]
to check whether the other station’s
transmit signal can be received directly.
u
To return to simplex operation, push
[LOW•DUP]
once or
twice, to clear the “DUP–” or “DUP” indicator.
i
To turn OFF the subaudible tone encoder, push
[TONE•T-
SCAN]
several times until no tone indicators appear.
While transmitting
While receiving
[TONE•T-SCAN]
“T” appears
[LOW•DUP]
“DUP–” or “DUP” appears
21
4
REPEATER OPERATION
ID-800H_1.qxd 2007.06.14 3:09 PM Page 21