43
7
SCAN OPERATION
■
Scan start/stop
D
Preparation
Scan resume condition
(p. 48)
; program the scan edges
(pgs. 45, 46)
; program 2 or more memory channels
(pgs. 29,
30)
; set skip settings
(p. 47)
, if desired.
D
Operation
q
Select VFO mode for full/programmed scan with
[V/MHz•SCAN]
; or memory mode for memory scan with
[M/CALL•PRIO]
.
• Select the desired bank for bank scan.
w
Set the squelch to the point where noise is just muted.
e
Push and hold
[V/MHz•SCAN]
for 1 sec. to start the scan.
• To change the scanning direction, rotate
[DIAL]
.
• The memory channel readout blinks the scan type as follows:
r
Push
[SET•LOCK]
to switch full and programmed scan
(P1, P2, P3, P4 and P5), if VFO is selected in step
q
.
t
To stop the scan, push
[V/MHz•SCAN]
.
• During full scan
• During programmed scan
• During memory scan
• During bank scan
Indicates scan edge channels.
• P1 stands for 1A/1B
• P1 to P5 are available when
they are programmed, and
switches with [SET•LOCK].
Indicates bank initial.
Push [SET•LOCK] to select
full (ALL), band* (A-8, A-5, A-
4, A-3, A-2, A-1, A-A) or pro-
grammed scan (P1, P2, P3,
P4 and P5) in sequence.
(*Depends on versions)
ID-800H_1.qxd 2007.06.14 3:09 PM Page 43
