![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017073.webp)
56
10
POCKET BEEP AND TONE SQUELCH
10
i
When a signal with the matching tone is received, the
transceiver emits beep tones and blinks “
S
.”
• Beep tones sound for 30 sec. and “
S
” blinks. To stop the
beeps and blinking manually, push any key. When the beep
tones are not stopped manually, “
S
” continues blinking until
[PTT]
is pushed (see step
o
).
o
Push
[PTT]
to answer.
• “
S
” disappears and cancels the pocket beep function auto-
matically.
!0
Push
[TONE•T-SCAN]
several times until “T SQL” or
“DTCS” disappears to cancel the tone squelch or DTCS
squelch function.
z
Set the operating frequency.
x
Program the CTCSS tone frequency or DTCS
code in set mode.
➥
Push
[
SET
B(D-OFF)]
to enter set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “SET,” if necessary.
➥
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
several times until “CT” for tone squelch or
“DT” for DTCS squelch appears.
• “T SQL” blinks when tone squelch (“CT”), or
“DTCS” blinks when DTCS squelch (“DT”) is
selected.
➥
Push
[
Y
Y
]
/
[
Z
Z
]
to select the desired tone fre-
quency or DTCS code.
➥
Push
[
SET
B(D-OFF)]
to select “DTP” then
push
[
Y
Y
]
/
[
Z
Z
]
to select the DTCS polarity.
➥
Push
[
CLR
A(MW)]
to exit set mode.
c
Push
[FUNC]
then push
[
DUP
+ 8(TSQL
S
S
)]
or
[
MID
5(DTCS
S
S
)]
to turn ON the pocket
beep with tone squelch or DTCS squelch, re-
spectively.
v
When a signal with the matching tone is re-
ceived, the transceiver emits beep tones for
30 sec. and blinks
“
S
.”
b
Push
[PTT]
to answer or push
[
CLR
A(MW)]
to stop the beeps and blinking.
• “
S
” disappears and cancels the pocket beep
function automatically.
n
To cancel the tone squelch or DTCS squelch
function, push
[FUNC]
then
[
ENT
C(T-OFF)]
.
• “T SQL” or “DTCS” disappears.
TSQL
S
DTCS
S
ID-800H_1.qxd 2007.06.14 3:09 PM Page 56