![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017046.webp)
29
5
MEMORY OPERATION
■
Programming a memory channel
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel) via the controller.
Push
Rotate for setting frequency, etc.
Push .
Rotate
Push for 1 sec. and continue to push
➠
Beep
“
Beep
Beep
Beep
“
“
“
“
“
Beep
“
VFO settings, including the set mode contents such as sub-
audible tone frequency or offset, can be programmed into a
memory channel.
q
Set the desired frequency.
➥
Push
[V/MHz•SCAN]
to select VFO mode.
➥
Set the frequency using
[DIAL]
.
➥
Set other data (e.g. tone frequency, duplex information,
etc.) if required.
w
Push
[S.MW•MW]
.
• “
!
” indicator and the memory channel number blink.
e
Rotate
[DIAL]
to select the memory channel to be pro-
grammed.
• Memory channels not yet programmed are blank.
r
Push and hold
[S.MW•MW]
for 1 sec. to program.
• 3 beeps sound
• Memory channel number automatically increases when contin-
uing to push
[S.MW•MW]
after programming.
✔
CONVENIENT
Memory programming can be performed in versatile ways
e.g. memory channel to the same (or different) memory chan-
nel, memory channel to the call channel, etc.
ID-800H_1.qxd 2007.06.14 3:09 PM Page 29