![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_instruction-manual_3781017092.webp)
75
11
DIGITAL MODE OPERATION
D
D
Repeater operation into another zone
q
Set the desired repeater’s frequency, offset and shift direc-
tion in VFO mode.
(p. 21)
• Select “DV” mode in advance.
w
Set your own call sign.
(p. 65)
• See p. 61 for your own call sign programming.
e
Set the desired station call sign.
(pgs. 66, 67)
• When making a CQ call
Set the desired repeater’s
(in a different zone)
call sign, for
the area you want to make a CQ call, into “UrCALL.”
- “/,” stands for “CQCQCQ,” is added at the 1st digit automatically.
• See p. 63 for station call sign programming.
r
Set the repeater’s call sign as follows;
a
Push
[SET•LOCK]
to enter call sign set mode.
• Rotate
[DIAL]
to select “CALL” if necessary.
s
Push
[SET•LOCK]
or
[S.MW•MW]
several times to se-
lect “RPT1 C.”
d
Rotate
[DIAL]
to select the nearest repeater’s call sign.
f
Push
[SET•LOCK]
for 1 sec. to set the call sign for
“RPT1 C.”
g
Push
[SET•LOCK]
to select “RPT2 C.”
h
Rotate
[DIAL]
to select the gateway repeater’s
(in the
same zone)
call sign.
• The call sign should have “G” setting as the 8th digit.
• Push
[SET•LOCK]
or
[S.MW•MW]
to display last 6-digit or
first 6-digit of the call sign, respectively.
j
Push
[SET•LOCK]
for 1 sec. to set the call sign for
“RPT2 C.”
k
Push one of
[TONE•T-SCAN•BK]
,
[LOW•DUP]
or
[MONI•DTMF•EMR]
to exit call sign set mode.
t
Push
[PTT]
to transmit; release to receive.
ID-800H_1.qxd 2007.06.14 3:09 PM Page 75