![background image](http://html1.mh-extra.com/html/sencore/mrd-4400/mrd-4400_quick-start_1239281001.webp)
Quick Start
MRD 4400 Advanced Modular Receiver
1
Contents
Unpack the MRD 4400 from the box
and packaging materials it was shipped
in. Verify all of the following items are
present:
• MRD 4400 Advanced Modular Receiver
1x
• Line Cord
1x
• User Manual CD
1x
If any of these items are missing or
damaged, please contact Sencore to
obtain replacements.
Installation
Management Port
The MRD 4400 can be managed through its web interface, SNMP or
the front panel. To use the web GUI or SNMP, the management IP
address must be configured. Contact your IT department if you are
unsure of these settings.
DHCP IP Address Setup:
1.Press
2.Use
and
to move the cursor to “Admin”, then press
3.Use
and
to move the cursor to “Unit Networking:” then press
4.Press
5.Use
and
to move the cursor to “DHCP”, then press
6.Use
and
to change the selection to, “Enabled”, then press
to save.
Static IP Address Setup:
1.Use
and
to move the cursor to “DHCP”, then press
2.Use
and
to change the selection to “Disabled” and then press
to
save.
3. Use
and
to select the column to edit and use
and
to change
the IP and then press
to save.
4.The cursor will now be on, “Mask.”
5.Use
and
to select the column to edit and use
and
to change
the Subnet Mask, then press
to save.
6.The cursor will now be on, “Gateway.”
7.Use
and
to select the column to edit and use
and
to change
the Gateway, then press
to save.
Open a web browser (IE 7 or above, Firefox 3.5 or above, or Chrome) and type:
http://<IP Address>
Default password is blank.
1.Secure the MRD 4400 into the rack space.
2.Make all appropriate I/O connections on the
back of the unit.
3.Connect an Ethernet Cable from a
management network to the LAN port.
4.Connect the line cord and move the power
switch from 0 to I to power on the unit.
2
3
Congratulations on purchasing the MRD 4400. Follow these installation and configuration instructions to get started. Use the web
interface for easiest configuration. If you need assistance, please contact Sencore ProCare at (605) 978-4600 or [email protected].
www.sencore.com | 605.978.4600 | [email protected] | Copyright © Sencore Inc. 2014
Form 8086
A