![background image](http://html1.mh-extra.com/html/zamel/rop-03/rop-03_manual_3143115001.webp)
www
.ledix.pl
2-channel radio
flush receiver
ROP-03
Zamel Sp. z o.o.
PL 43-200 Pszczyna, ul. Zielona 27, Poland
tel: +48 32 449 15 00, fax: +48 32 449 15 02
e-mail: [email protected], www.ledix.pl
10÷14 V DC / 0,7 W; IP20
weight: 36 g
Declaration of Conformity is on www.ledix.pl
2-channel radio flush receiver
ROP-03
The symbol means selective collecting of electrical and electronic equipment.
It is forbidden to put the used equipment together with other waste.
ROP-03 receiver is designed to carry out simple control functions in the low-voltage instal-
lations from 10 ÷ 14 V DC. In connection with EXTA FREE system transmitters it enables the
realisation of the switch on/switch off function, the monostable mode, the bistable and
time modes. The receiver is recommended for use with LED diode lighting.
Characteristic features:
• cooperation with wireless EXTA FREE system transmitters,
• independent control of up to two receivers in the following modes: switch on/switch off,
monostable, bistable, time,
• 2 relay potential free outputs (NO) with a maximum capacity of 5 A for 250 V AC,
• wide operation range (up to 230 m outdoors),
• small dimensions - suitable for mounting in a typical Ø60 junction box,
• low power consumption in the standby mode (0.15 W) - the receiver is used to a continu-
ous operation.
Mounting in a Ø60
junction box
Mounting
indoor only
Co-operation
with EXTA FREE
transmitters
ROP-03 ENG Ver. 01
SCAN
the technical
data
10
÷
14 V DC
CET Lighting Sp. z o.o. declares that the equipment complies with the principal requirements
and other applicable rules of the RTTE Directive.