How it works
Step one
Set up the transmitters and start
playing audio.
Step four
Change the channel by pressing
the “CH” button will change
colour to indicate the channel.
Step two
Plug headphones or speaker into
the receiver.
Troubleshooting
Check out the back of this sheet
for tips on solving problems that
you may run into.
Step three
Press and hold the power button
to turn the receiver on. The LED
light will glow to indicate it is on.
Step five
When required, plug the Ned into
a power source via a mini-USB to
charge the device.
1
4
2
5
3
Something not working? Visit
silentdiscoking.com/help
or call our 24/7 support line
0207 0603 653
Setting up your Ned Receiver